Suzhou Rilant Machinery Co., Ltd.
RILANT, Focus On Auto Industry Solution!
Add to Cart
Steel Coil Cut To Length Machine CNC Straightening Cutting Production Line
1, General Description
This cutting to length production line consists of feeding device, unwinding, lead device, leveling machine (with traction measurement), shearing machine, transition frame, stacking device, hydraulic system, pneumatic system and electronic control system.
The steel coil is lifted by the crane to the discharge platform, and the loading truck transports the steel coil to the unwinding device, then starts the lifting cylinder, and uses the oil cylinder to lift the coil to the center of the unwinding machine spindle, and the unwinding machine moves the right and left cylinders, and the clamp Tight steel coils. Start the rotary motor of the rubber roller of the feeder, drive the steel coil to rotate, and make the coil head aligned with the unwinding scraper. Then the scraper mechanism swings the cylinder to make the scraper head abut the steel coil head, and the motor rotates to bring out the steelhead, then the head is pressed down by the pressing swing cylinder and sent to the leveler. After leveling, the encoder is automatically commanded by the encoder to shear the board and cut to the required length.
2, Machine Specifications
1, Coil thickness: δ1.0~3mm
2, Coil width: 800mm-1300mm
3, Coil I.D.: adjustable
4, Coil O.D.: Ф1500 mm
5, Coil weight: ≤10t
6, Coil material: Carbon steel, stainless steel
7, Cutting length: ≤2000 mm
8, Diagonal error: ≤±1mm
9, Plate flatness: 1 mm/m2
10, The stack weight: ≤±8t
11, The whole line power: about 60KW
12, Working power:about 50KW
13, Unit area(L*W):25 m×6 m
A Loading rack
1. Position the coil material on the unwinder reel, load 10 tons, the manual screw is tightened, with brake device, all hoisting vehicles are available, 2 shafts.
2, Performance: the core device is inserted into the middle of the coil, adjust the manual screw nut so that the coil is tightened, and then the tensioned coil is hoisted or loaded on the loading rack, which is installed on two rails with brakes.
B, Hydraulic support type uncoiler machine:
1. Structure overview:
The uncoiler is a single-arm support type, which is used for arranging the coil plate and can carry 10t. The support can be moved longitudinally along the slide channel under the action of the hydraulic cylinder to adapt to different widths of the sheet material.
C, The roller feeder:
The device is composed of a pneumatic system, a rubber roller, a lead frame and the like. The coil is placed on the uncoiler, then the head is introduced into a pair of rubber rollers, and the coil is ground to a retractable table and sent directly to the screen. This process is convenient, fast and efficient.
D, leveling machine: (1.0 ~ 3) mm × 1300 mm × 13 rolls (including a pair of rolls)
1, Structure overview:
The machine is divided by machine base, frame, upper beam, idler, work roll gap adjusting motor, reducer and gearbox, universal joint and so on. The drive motor adopts an AC motor speed control device. The work roll consists of five upper rollers and six lower rollers and a pair of opposed rollers. Each row has an additional row of rollers on the upper and lower sides. It is driven by a motor, a reducer, a transfer case, and a universal joint. , bearing lubrication. The leveling accuracy is up to 1mm/m2, saving energy and reducing consumption, starting smoothly and accurate. The transmission mode is driven by a closed gear transfer case. Adjustment method: the upper roller is driven by a worm gear reducer, and the movable beam is mechanically adjusted and equipped with a manual fine adjustment device.
4, Our Service
5, Package And Delivery
6, FAQ